OpenBSD/hp300 runs on most of the HP 9000 series 300 and 400 workstations, based on the Motorola 680x0 processor family.

There is currently no maintainer for this port, although Todd Miller (millert@openbsd.org) and Miod Vallat (miod@openbsd.org) hack on it from time to time. Others are definitely welcome to contribute!

Table of contents


OpenBSD follows in the footsteps of 4.4BSD by supporting the hp300; most types of machine are supported with 68030 or better processors, along with SCSI and HP-IB storage devices.

OpenBSD/hp300 runs 8k pagesize executables natively (the first operating system for the hp300 to do so), maintaining the standard binary format used by all other OpenBSD m68k platforms.

Over time, the 4.4BSD codebase was extended and corrected, and the hp300 port switched to the regular config(8) for kernel configuration.

Shortly after OpenBSD 2.9 was released, support was added for the 425e model, using a serial console on the first serial port.

Recent development features the replacement of the old hp300-specific SCSI code base with the generic SCSI subsystem (as of 3.6), dynamic attachment and detachment of HP-HIL devices, and support for the SGC bus and frame buffers (as of 3.7), as well as the Apollo Domain keyboard and mouse (as of 3.8).

Current status:

Currently, all the hardware listed in the supported hardware section below boots multi-user, and supports enough of the on-board devices to be generally usable, unless specified otherwise.

A native, unaccelerated X11R6 server is available for all supported frame buffers except the SGC frame buffers.

Projects (in no particular order):

Supported hardware:

Supported machines

SCSI controllers and peripherals

(*) SCSI-2 devices are known to work, but may require changing a jumper to restrict them to SCSI-1 behaviour. Refer to your hardware documentation for details.

HP-IB/CS80 controllers and peripherals

Serial ports

Ethernet interfaces

Frame buffers

Input devices


More information about hardware configuration may be found on the hp300 FAQ page.

Unsupported machines

Unsupported devices

Getting and installing OpenBSD/hp300:

The latest supported OpenBSD/hp300 release is OpenBSD 4.8. Here are the OpenBSD/hp300 4.8 installation instructions .

Snapshots are made available from time to time, in this location as well as in a few mirrors. Here are the OpenBSD/hp300 snapshot installation instructions as well.

Supported platforms
$OpenBSD: hp300.html,v 1.78 2010/11/01 22:06:58 jasper Exp $